krkr
المدير العام
عدد المساهمات : 459
تاريخ التسجيل : 17/02/2013
العمر : 29
الموقع : http://myegykero.com
 |  موضوع: آخر إصدار Phoenix Service Software 2012.50.001.49220  الأربعاء فبراير 27, 2013 2:23 pm | |
| آخر إصدار Phoenix Service Software
2012.50.001.49220 [size=16]
Main component versions in the
release:
• Product API 2012.46.2.49145
• Nokia Connectivity Cable USB Driver Version 7.1.101.0
• Flash Update Package 12.49.0
• FUSE Connection Manager v 2012.51.1
MAIN CHANGES & ERROR CORRECTIONS FROM
PREVIOUS VERSION 2012.50.0.49146
Error Corrections & changes:
New products: RM-647
New products are not implemented to Phoenix anymore. Phoenix development
is closed.
IMPORTANT!
Phoenix installation requires a network connection if DOT.NET framework
4.0 is not installed on PC
(.NET framework is downloaded from *** during phoenix installation).
New common data package ******** in use. Please see ******** SR1315 in
KICS Information Center for further information.
All Nokia Service Software Applications will use following ******** for
product specific data:
- ******s XP: C:\********s and Settings\All Users\Application
Data\Nokia\Packages
- ******s 7: C:\Program Data\Nokia\Packages
Please see articles SR1774 for more information on the use of Nokia
Data Package manager – tool, and article SR1854 for more information on
the Nokia Service Application Manager Tool.
During installation, Data Packages should be installed in these
directories, if they install to any other ******** by default. Target
folder for local data packages can be changed in the installation wizard
manually.
This version contains the latest Tucson components. Therefore do not use
Tucson Add-On Installation Packages.
Before you start Phoenix or Care Suite installation to ******s 7 the
User Account Control (UAC) should be turned off from ******s Control
Panel settings.
For more information concerning new options in “Firmware Update” – menu
and their use, Please see ********s SR1313 and SR1659 in KICS
Information Center.
Tucson operations combined with “flash” – option are now handled in the
same way as “refurbishment”, which requires Mass Memory ******* File to
be available.
Use of Flash option simultaneously with product code change for USB Only
phones is restricted. It is recommended to flash phone separately with
Firmware Update. Please refer to product specific instructions.
Connection media to FLS-5 must be configured to be “USB_FBUS”, after
FLS-4 support has been removed FBUS does not work anymore with FLS-5
KNOWN ERRORS & LIMITATIONS
• FLS-5 drivers do not support 64 bit OS, so phones using FLS-5
/USB_FBUS connection can not be serviced in 64 bit operating systems
• N9- RM-696 Product Code change still unreliable
• Product code change is not working with RM-838, RM-852, RM-843. Please
use Product identity tool (SR2872)
• Energy Management Calibration should not be performed for products
using the “Quantum” engine (RM-689, RM-702, RM-704 and other product
using the same engine)
• Software downgrade with Tucson system is only possible for BB 5.0
products supporting the Data Package 2 concept.
• Flashing with setup FLS-5, SS-46 and product specific adapter is not
supported anymore. FLS-5 can be used with other product specific cables
and adapters, but not with SS-46 Interface Adapter.
• If you install old DCT-4 data packages, Flash Update Package File
installation path may be wrong. This is caused by very old DCT-4 data
packages which contain Flash Update Package and overwrite current
information during installation. If you experience problems when
updating FPS-x prommers, please check that Phoenix “Prommer maintenance”
is looking for the files from the correct ******** which is
“C:\Program Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will
show error “Update via ini – file failed”. In this case, select
“Update” from that Phoenix “Prommer maintenance” – UI, browse to
correct directory and select “fpsxupd.ini” for all other prommers
except the FPS-8.
• FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21
prommer with new HW version 11 has been released to correct this. Sales
pack code is 0089J83 , old HW version is not delivered anymore
• Please refer to product specific ********s and instructions concerning
the limitations of the RX-51 product
• When version 2010_12_8_42304 or newer with FUSE connection manager is
installed on top of older Phoenix versions, there may be an additional
delay of several minutes when you start Phoenix for the first time.
Please wait patiently; Phoenix will start after configuration is
finished.
• After you close Phoenix, it may not restart. To rectify this:
- Use ******s Task Manager to manually shut down phoenix.exe and
FuseService.exe processes, or optionally restart your PC
• It is not possible to program Mass Media ******* file to some devices
over direct USB cable connection, due to the large size of the file.
For these models a feature called “Media Check” has been implemented.
When this type of product is connected to service software / PC via
direct USB cable the refurbishment option will be disabled. Please use a
flash prommer. Affected products using Media Check are: RM-122,
RM-175, RM-176, RM-186, RM-246, RM-247, RM-296, RM-297, RM-320, RM-462,
RM-472, RM-484, RM-505, RM-555, RM-559
• To be able to use the help files in ******s 7 you need to install
******s Help program (WinHlp32.exe) for ******s 7. Ways to locate
WinHlp32.exe:
- Start Phoenix with online connection to Internet, select “Help” and
“Phoenix help”. Click the “Microsoft Help and Support” ***site link.
Download WinHlp32 and install it.- Go to Microsoft Corporation.
Type “WinHlp32″ to “Search Microsoft.com” – field. Locate ******s Help
program (WinHlp32.exe) for ******s 7 and install it
• When using flash prommers, only one connection type to one prommer is
allowed. Please use either NFPD USB or NFPD TCPIP connection to one
prommer, not both connections to same prommer
Supported operating systems
• ******s 7 32 Bit version
• ******s 7 64 Bit version (Please note that FLS-5 drivers do not
support Win 7 64 bit OS, therefore FLS-5 can not be used in this
operating system)
IMPORTANT!
Phoenix installation requires a network connection if DOT.NET framework
4.0 is not installed on PC[Microsoft .NET Framework 4 (Standalone Installer)],
if you have installed it, you can ignore this.
(.NET framework is downloaded from *** during phoenix installation).
[size=21]
Download
يجب عليك التسجيل لمشعاتة الرابط
[url=http://bitshare.com/files/4jji62sy/Phoenix_Service_Software_2012.50.001.49220_Cracked.zip.html]
ماي ايجي كركر
| |
|
